MEC FULL SIZE 1ST STAGE REGULATOR - F.POL x 3/4" FNPT - 10 PSI

ID: MEGR-1622H-JGJ

MEC EXCELA-FLO™ FULL SIZE FIRST STAGE REGULATOR



  • FEMALE POL INLET X 3/4" FNPT OUTLET

  • FULL SIZE TOP MOUNT / STRAIGHT THRU

  • 250 PSIG MAXIMUM ALLOWABLE INLET PRESSURE

  • OUTLET RANGE: 8 - 12 PSIG; SETPOINT: 10 PSIG

  • 2,750,000 BTU/HR CAPACITY

  • 3/4" FNPT SCREENED VENT

  • TWO 1/8" FNPT PLUGGED PORTS

  • ORDER IN EACHES OR 10 FOR A CASE

These first stage regulators are used to reduce LP gas tank pressures for a second stage regulator (normally 10 PSIG). All MEC first stage regulators are red indicating high outlet pressure. First stage full size regulator vents have 3/4” FNPT tapped ports and E-Z Grip screens located over the outlet. Both the MEGR-1122H and the MEGR-1622H series offer optimal relief performance that exceeds UL test requirements providing double failure overpressure protection when used with MEC MEGR-1622 & MEGR-1652 series second stage regulators. All MEC Excela-FloTM domestic regulators feature a 25 year recommended replacement life and the MEC exclusive tear away leak check adhesive sticker.

MEGR-1622H Series offers all of the same features as the compact MEGR-1122H Series in a full size version. Our full size MEGR-1622H Series has a large fabric reinforced diaphragm for superior downstream regulation, heavy duty wrench flats, and a large 3/4” FNPT tapped drip lip vent to help prevent relief vent blockage.

Specifications:

  • Type: First Stage
  • Max. Inlet Pressure: 250 PSIG
  • Exterior Finish: Red Powder Coat
  • Interior Finish: Red Powder Coat
  • Orifice Size: 0.219”
  • Diaphragm: Fabric Reinforced NBR Molded Lip O-Ring Bonnet/Body Seal
  • Relief Type: Internal Relief - Spring Loaded
  • Bonnet / Body Material: Die Cast Aluminum
  • Seat Material: Fluorocarbon (FKM)
  • Mounting Holes: Standard 3-1/2” Center
  • Pressure Taps: #54 Orifice, 1/8” FNPT, Plugged (2)
  • Relief Travel Stop: Molded in Adjustment Cap - Black

We found other products you might like!