MEC LOW PRESS REG - VENT OVER OUTLT 1/4" FNPT x 3/8" FNPT - 11" WC

ID: MEGR-1912/101

MEC EXCELA-FLO™ SINGLE STAGE PRESSURE REDUCING REGULATOR



  • 1/4" FNPT INLET x 3/8" FNPT OUTLET

  • 250 PSIG MAXIMUM ALLOWABLE INLET PRESSURE

  • OUTLET RANGE: 9.25 - 13 INCHES WATER COLUMN; SETPOINT: 11" WC

  • 242,953 BTU/HR CAPACITY

The MEGR-1912 Series UL Listed regulators are direct-operated, spring-loaded models designed for use in a variety of service and industrial applications. These regulators have limited-capacity internal relief across the diaphragm to help minimize over pressurization.

The MEGR-1912 Series with capacity ratings of less than 320,000 BTU/hr (129 scfh), are often used on small portable outdoor appliances.

Underwriters Laboratories requires horizontally mounted regulators to be installed with vent opening protection to prevent blockage by freezing rain.

Specifications:

  • Type: Single Stage
  • Max. Inlet Pressure: 250 PSI
  • Vent Screen: Monel
  • Gasket: CGR 2750
  • Relief Valve: Brass and Zinc
  • Control and Relief Valve Spring: Plated Steel
  • Diaphragm Assembly: Nitrile (NBR) with Zinc disk
  • Spring Case: Die Cast - Zinc
  • Spring Seat: Plated Steel
  • Diaphragm Plate: Plated Steel
  • Body Material / Lower Casting: Die Cast - Zinc
  • Temperature Range: -20° to 170° F
  • Approximate Weight: 1.3 lbs.
  • Listings: Select models are UL Listed / UL 144