PNEUMATIC ACTUATOR

All Fisher 1-1/4, 2 and 3-inch threaded NPT, & 3 and 4-inch single and double flanged internal valves can be fitted with a pneumatic actuator that can be used to open and close the internal valves from a remote location. Use of pneumatic actuators permits the opening and closing of the internal valve to be tied into the air brake of the transport or bobtail. Pneumatic Actuators can also provide a convenient way to remotely operate internal valves on stationary storage tanks at bulk plants.

Features:

• Provide a convenient way to remotely operate internal valves on stationary storage tanks at bulk plants
• Besides air pressure, nitrogen, or cabon dioxide can also be used to pressure the cylinder
• 1/4" NPT fuse plug installed in center port of actuator housing for thermal release

Specifications:

• Configuration: 1-1/4" NPT Type C407-10 Internal Valve
• Pressure Limits: Minimum: 60 psig; Maximum: 250 psig
• Temperature Capabilities: -20 to 150°F
• Thermal Release Melt Point: 212°F
• Approximate Weight: 3 lbs