Skip to the beginning of the images gallery

MEC INDUSTRIAL 1ST STAGE REGULATOR - 3/4" FNPT - 5-20 PSI – 12MM BTU

ID: MEGR-1627/6210

MEC EXCELA-FLO™ COMMERCIAL / INDUSTRIAL FIRST STAGE / HIGH PRESSURE REGULATOR

3/4" FNPT INLET X 3/4" FNPT OUTLET

FIRST STAGE HIGH PRESSURE

250 PSIG MAXIMUM ALLOWABLE INLET PRESSURE

OUTLET RANGE: 5 - 20 PSIG; SETPOINT: 10 PSIG

12,400,000 BTU/HR CAPACITY @ 100 PSI INLET / 6,700,000 BTU/HR @ 20 PSI INLET

1/2" ORIFICE

Details

The MEGR-1627 Series commercial / industrial regulator is a large capacity, high pressure unit for use in conjunction with MEGR-CS1200 or MEGR-S1202 Series regulators. It can also be used on final-stage (PSI to PSI) service. The diaphragm case and/or regulator body on the MEGR-1627 Series can be rotated in any of four positions to allow installation in locations with limited space. Available with a monitor or integral relief valve. The MEGR-1627 Series is perfectly suited for jurisdictional systems, grain dryers, direct fired vaporizers or other high capacity service applications.

Specifications:

Type: Adjustable / PSI
Orifice Diameter: 3/8” or 1/2”
Orifice Material: Aluminum
Max. Inlet Pressure: 250 PSI
Regulator Spring: Steel
Stem Guide / Disk Holder: Stainless Steel
Valve Stem: Steel
Exterior Finish: Grey Powder Coat
Diaphragm: Fabric Reinforced Nitrile (NBR)
Bonnet Cap & Housing/Body Material: Cast Aluminum/ Iron
Temp. Range: -20° F. / 180° F.
Listings: Select models are UL Listed / UL 144