ME574 HOSE END FILL ADAPTER SWIVEL WITH BLEED VALVE

These adapters are intended to be attached to the LP-Gas delivery truck hose outlets. They feature minimal flow restriction which allows for fast delivery while providing an integral check valve to prevent further product loss if the tank fill valve fails to close. In the event the tank fill valve should fail, leave the fill adapter connected to the fill valve and disconnect the filler hose end valve. Then place the filler valve cap onto the fill adapter. The tank fill valve should be repaired immediately.

To increase flow up to 30 percent over standard hose end filler adapters use the ME578 hose end fill adapter. It is a full-flow, manually operated hose end fill adapter where the user controls whether the valve is open or closed, providing maximum protection against product discharge.

Features:

• Integral breakaway feature in the event of truck roll away leaving check intact on tank
• ME570, ME572, ME574, ME578 shortest overall height in the industry allowing adapters to fit inside tank hood
• ME571 has a floating internal seat design which allows check to swivel freely when installed on hose end valve
• ME571H has same features as standard ME571 but with 30% MORE FLOW
• ME578 has a full-port design which allows for full flow
  • Removable shutoff key and key ring supplied
• Extended versions provide an additional 7” for use on underground tanks
  • Prevents pinching or cutting of the delivery hose on the protective tank collar
  • Eliminates dangerous extensions that do not incorporate the appropriate fill check device
  • Eliminates unsafe stacking of multiple fill check adapters to obtain the desirable fill connection height
  • Overall length allows adapter to fit inside protective tank collar
  • Optional heavy duty aluminum handle with a stainless steel 1-3/4” female Acme insert cast into the handle.